New Reliable 800-150 Exam Bootcamp 100% Pass | Valid Valid 800-150 Test Prep: Supporting Cisco Devices for Field Technicians

The cost for the registration of the certification is considerably expensive, it varies from 100$ to 1000$. That is why DumpTorrent has created budget-friendly and updated prep material compared to other websites that do not assure the passing of the exam. We also assure you that the sum won't be wasted, and you won't have to pay for the certification a second time. For customer satisfaction, we also offer you a demo version of the actual 800-150 Dumps so that you may check their validity before even buying them.

On DumpTorrent website you can free download part of the exam questions and answers about Cisco Certification 800-150 Exam to quiz our reliability. DumpTorrent's products can 100% put you onto a success away, then the pinnacle of IT is a step closer to you.

>> Reliable 800-150 Exam Bootcamp <<

Valid 800-150 Test Prep, Exam 800-150 Preparation

Under the instruction of our 800-150 exam torrent, you can finish the preparing period in a very short time and even pass the exam successful, thus helping you save lot of time and energy and be more productive with our Supporting Cisco Devices for Field Technicians prep torrent. In fact the reason why we guarantee the high-efficient preparing time for you to make progress is mainly attributed to our marvelous organization of the content and layout which can make our customers well-focused and targeted during the learning process with our 800-150 Test Braindumps.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q12-Q17):

NEW QUESTION # 12
Drag and drop the steps from the left into order to capture the status of a Cisco device.

Answer:

Explanation:

Explanation:
This procedure is taught in theFLDTEC courseunder theDevice Configuration and Verificationsection and reflects standard field technician workflows:
* Connect to the console portusing a console cable and terminal software (like PuTTY or Tera Term).
* Access the CLIof the Cisco device by logging in via the console session.
* Create a log fileor enable logging in the terminal emulator to begin capturing output.
* Check the router statususing commands such as show running-config, show ip interface brief, or show version.
* Save the output filefrom the terminal emulator for documentation, troubleshooting, or escalation.
This logical flow ensures accurate diagnostics and traceability during field support operations.

NEW QUESTION # 13
Drag and drop the steps of the boot sequence process of a Cisco device into order on the right.

Answer:

Explanation:

Explanation:
Step 1 # Performs power-on self-test (POST)
Step 2 # Loads and runs bootstrap code (firmware)
Step 3 # Finds and loads the Cisco IOS software
Step 4 # Finds and loads the configuration
Step 5 # Runs the configured Cisco IOS software
This startup process is thoroughly described in theFLDTECcourse and alignswith Cisco's standard IOS boot process:
* POST (Power-On Self-Test):Verifies hardware functionality including memory and interfaces. This occurs immediately upon powering the device.
* Bootstrap Code Execution:Bootstrap is a small program in ROM that initiates the boot process.
* Cisco IOS Loading:Bootstrap locates and loads the IOS from flash memory or another source (e.g., TFTP).
* Configuration Loading:The router then loads the startup-config from NVRAM (if available).
* IOS Execution:Once the configuration is loaded, the device enters operational mode and executes the IOS with the loaded config.
This sequence is vital for field technicians to understand for troubleshooting boot failures or performing device recoveries.

NEW QUESTION # 14
Which two network design strategies in Cisco data center solutions improve fault tolerance and high availability? (Choose two.)

A. Virtual port channels for link aggregation
B. Redundant supervisor engines and fabric modules
C. High-density 10/40/100 gigabit Ethernet connectivity
D. SAN extension over IP networks (FCIP)
E. Access layer switch deployment

Answer: A,B

Explanation:
To ensurehigh availability and fault tolerancein Cisco data center designs, two effective strategies include:
* Redundant Supervisor Engines and Fabric Modules: These provide failover capabilities, so if one supervisor or fabric module fails, another can take over, maintaining network operations without interruption.
* Virtual Port Channels (vPCs): vPCs allow connections to be made to two physical switches while appearing as one logical switch. This prevents loops and adds redundancy and load balancing, which is critical in high-availability environments.
Other options may enhance performance (e.g., high-density Ethernet) or extend functionality (e.g., FCIP), but do not directly contribute to fault tolerance and high availability in the same way.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware

NEW QUESTION # 15
What is the first action that must be taken before removing a standby supervisor module from a Cisco MDS
9700 Series Switch?

A. Perform a manual failover to the standby supervisor.
B. Put themodule into out-of-service mode.
C. Disconnect all network interface cables.
D. Shut down the entire switch.

Answer: B

Explanation:
In theFLDTEC course, the process for removing or replacing asupervisor module- especially thestandby supervisor- in a modular switch like theCisco MDS 9700is clearly outlined. Cisco documentation states:
"Before removing a standby supervisor module, it must first be placed into out-of-service mode using the CLI command system no supervisor <slot-number> or via the appropriate management interface." This action ensures the systemacknowledges the supervisor is no longer participating in redundancy, allowing a safe and controlled removal without impacting system operations.
Why not the other options?
* A. Shut down the entire switch# Not required; MDS switches are built for high availability and allow hot-swap operations.
* C. Disconnect all network interface cables# This applies to line cards or interfaces, not to supervisor removal specifically.
* D. Perform a manual failover# Failover is requiredwhen removing the active supervisor, not the standby one.

NEW QUESTION # 16

Refer to the exhibit. What is the redundancy implementation in this Cisco UCS architecture?

A. Redundancy is achieved through dual fabric interconnects, providing separate paths for FCoE, FC, and LAN traffic.
B. Redundancy is limited to the uplink connections, with no failover capabilities between the fabric interconnects.
C. Redundancy is implemented at the chassis level only, with chassis 1 acting as a backup for chassis 2.
D. The system uses a single point of connectivity, relying on internal redundancy within each UCS chassis.

Answer: A

Explanation:
In the providedCisco UCS architecture diagram, the infrastructure consists of:
* Two Fabric Interconnects (A and B), each connecting to:
* Ethernet (LAN)
* Fibre Channel (FC)
* FCoE (Fibre Channel over Ethernet)
* Both Fabric Interconnects are independently connected to bothCisco UCS Chassis 1 and 2through I/O Modules (IOMs).
This is theclassic active-active UCSdesign, providingfull path redundancyfor all traffic types:
* LAN uplinksare handled separately by Fabric Interconnect B.
* SAN trafficis distributed throughFC uplinksandFCoE uplinksvia Fabric Interconnects A and B.
* Each server in the chassis canfail over its traffic to the alternate fabric if one interconnect fails.
This architecture guaranteesno single point of failure, which is essential inmission-critical environments like data centers and enterprise server farms.

NEW QUESTION # 17
......

DumpTorrent provides you with Cisco 800-150 exam questions in 3 different formats to open up your study options and suit your preparation tempo. The Cisco 800-150 PDF is the most convenient format to go through all exam questions easily. It is a compilation of actual Cisco 800-150 exam questions and answers.

Valid 800-150 Test Prep: https://www.dumptorrent.com/800-150-braindumps-torrent.html

We are here to provide you the high quality 800-150 braindumps pdf for the preparation of the actual test and ensure you get maximum results with less effort, As you have experienced various kinds of exams, you must have realized that renewal is invaluable to 800-150 study materials, especially to such important 800-150 exams, Candidates who pass 800-150 certification prove their worth in the Cisco field.

If a password file is stolen or copied and cracked, Valid 800-150 Test Prep the attacker can then log on to that system as what the systems perceive is alegitimate user, But in order to complete these 800-150 tasks, you will still have to know switch features and protocols inside and out.

100% Pass Quiz Authoritative Cisco - 800-150 - Reliable Supporting Cisco Devices for Field Technicians Exam Bootcamp

We are here to provide you the high quality 800-150 Braindumps Pdf for the preparation of the actual test and ensure you get maximum results with less effort.

As you have experienced various kinds of exams, you must have realized that renewal is invaluable to 800-150 study materials, especially to such important 800-150 exams.

Candidates who pass 800-150 certification prove their worth in the Cisco field, Our 800-150 study materials help users to pass qualifying examination to obtain a qualification certificate are a way to pursue a better life.

About considerate after service.

Paul Walsh Paul Walsh

Biography

New Reliable 800-150 Exam Bootcamp 100% Pass | Valid Valid 800-150 Test Prep: Supporting Cisco Devices for Field Technicians

Valid 800-150 Test Prep, Exam 800-150 Preparation

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q12-Q17):

100% Pass Quiz Authoritative Cisco - 800-150 - Reliable Supporting Cisco Devices for Field Technicians Exam Bootcamp

Subscribe

All Access Membership